Trending Now

4 November 2026: Essential Security System Maintenance Steps for Maximum Protection

4 November 2026: How to Choose Between Professional Monitoring and Self Monitoring

4 November 2026: How to Set Up a DIY Home Security System Without Paying Monthly Fees

4 November 2026: The Hidden Security Camera Features You Are Not Using

4 November 2026: Simple Fixes for Common Home Alarm System False Alarms

DVRAID.Com

64 min read

2MT-4XXX Series User Guide

M.Salih ASLAN • 14 August 2023 • 0 Discussion

2MT-4XXX Series User Guide

AI Powered

AI Content Summary

2MT-4XXX Series User Guide,Digital Video Recorders DVRs are devices which record video to a hard drive. DVRs are used with closed circuit security cameras to create a surveillance system that can detect an record crimes.

Key Moments & Highlights

1
2MT-4XXX Series User Guide
Key analytical insights and practical findings are highlighted here.
2
read next : InVid Tech Devices Password Reset.
Key analytical insights and practical findings are highlighted here.

CAUTION!

Using a faulty disk is risky. Faulty disks should be replaced immediately.

Contact your local dealer for information about hard disks.

Bad Sector Detection

Bad sector detection checks for bad sectors in hard disks.

1.Click Maintain > HDD > Bad Sector Detect.

Picture box 122 168w131h Picture box 128 67w55h

HDD Capacity 1863.02 GB

Block Capacity 116 GB

Status Not detected

Error Count 0

I J Normal B Damaged

.

.

2.Select the desired disk and detection type, and then click Detect to

Picture box 130 358w168h

start detection. Click Stop if you want to stop.

H Normal H Damaged

CAUTION!

The detection stops automatically when the error count reaches 100.

12 system configuration

Basic Configuration

1.Click System > Basic.

2.Configure the parameters.

NOTE!

•Only admin can set Enable Password.

•If Enable Password is not selected, no password is required for local login at system startup. However, a username and password are still required when you log in after a logout.

•You may also set startup Wizard here by clicking Wizard.

Picture 135 380w237h

3. Click Apply to save the settings.

Time Configuration

Time

1.Click System > Time > Time.

2.Select the correct time zone, and then set date and time formats and the system time. The following shows an example.

TimeZone (GMT+Di:0C) Sfijing Hong King Urumqi. Singapore Taipei •

Date Format YYYY-MM-DD ’

Time Format 24-hour ’

System Time 2017 - 06 - 20 C 14 : 27 : 35 3

Enable Auto Update NTP Server Address NTP Port

Update Interval

3.To use Network Time Protocol (NTP), enable auto update, set the address and port number of the NTP server, and the update interval.

4.Click Apply to save the settings.

DST

1.Click System > Time > DST.

2.Enable DST by selecting the check box, and then set the start time, end time, and DST bias correctly. The following shows an example.

Picture 136 387w58h

3. Click Apply to save the settings.

.

Time Synchronization

Use this function to synchronize camera time with the DVR. Time sync is enabled by default, and cameras will synchronize time with the DVR after getting online, and then synchronize once every 30 minutes.

1.Click System > Time > Time Sync.

tags: #access #ACTi #Analog cameras #Cloud Upgrade #coaxial #Configuration #digital video recorder #EZDDNS #firmware #hard disk #hybrid #install #installation #IP cameras #Live View #motion detection #Network settings #ONVIF #password reset #Playback #PTZ Cameras #PTZ control #QR code #Recorder #recorders #recording #Recording Schedule #Ring Alarm #security camera #Sensitivity #settings #surveillance #upgrade #Video recorders

Leave a Reply Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Hikvision How To Tutorials Part 1

5 September 2023

Before you go: Hikvision How To Tutorials Part 1