Advertisement

ZOSI Dvr Upgrade Tools Firmware and Guide

M.Salih ASLAN M.Salih ASLAN • • 4 Discussion
6ab0cf774ebbf3faa46b04ca6865cefc27b0dd10
AI Powered

AI Content Summary

This upgrade file applies for the ZR08MN / ZR08MM and ZR08MS DVR.  You can find your DVR's model number on the label at the bottom of your DVR. If your DVR's label is lost, please go to DVR's Main Menu - Information - System to take a photo to us, we will send the correct upgrade file to you.

Key Moments & Highlights
  • 1
    Strategic Vision & Disruption

    Foundational principles driving emerging methodologies and trends.

  • 2
    Efficiency & Practical Application

    Real-world hurdles explored with actionable optimization techniques.

  • 3
    Looking Ahead: Future Outlook

    What to anticipate in the next phase of development and impact.

This upgrade file applies for the ZR08MN / ZR08MM and ZR08MS DVR. 

You can find your DVR’s model number on the label at the bottom of your DVR.

If your DVR’s label is lost, please go to DVR’s Main Menu – Information – System to take a photo to us, we will send the correct upgrade file to you.

Advertisement

You can follow up the guide below to upgrade the DVR:

1) You needn’t open the upgrade file, please directly download the upgrade file and save it to your U-disk.

(Please save the upgrade file rootfs-3520dv400 in the root directory, not save it under any other folders.)

Note: to perform this process, you will want to use a USB 2.0 drive ideally 16 GB or less in size, formatted in FAT32.

Some customers have reported issues when downloading this file using the “Microsoft Edge” browser.

If the file was downloaded using the Microsoft Edge browser, this will cause the file to be converted to a text file, which can’t be read by the DVR. We recommend using a different browser for this process.

In case it helps, here is a link to a Youtube video demonstrating the process:

 

If you’re unfamiliar with how to format a USB in FAT32, this video provides the steps:

2) The file name must remain exactly as listed in the article for the DVR to recognize it as an update.

It should be rootfs-3520dv400, if the file name is changed to rootfs-3520dv400(1), the upgrade will be failed.

3) Before starting to upgrade, please unplug the power supply and mouse, then plug the U-disk and re-plug the power supply.

4) It can upgrade automatically as long as it has electricity, the upgrade process need to last several minutes, please be patient.

If the upgrade is successful, please go to the DVR’s Main Menu > Information > System to check if the firmware version and Launch date have changed.

If the upgrade is failed, we suggest you change another U-disk or USB port to try.

Please let us know if you have any questions:

Support Email address:  service@zositech.com

Our Facebook:  https://www.facebook.com/ZosiTechnology/

Support center: support@zositechhelp.zendesk.com

DVR Upgrade Files

Instruction Manual

Software

Table of Contents

NVR Upgrade Files

Software

Instruction Manual

Camera Upgrade Files

Instruction Manual

Software

Advertisement
Share this story
M.Salih ASLAN
About the Author

M.Salih ASLAN

Owner and Founder dvraid.com and dvrdestek.com

4 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Pure inspiration, zero spam ✨

Subscribe to our Newsletter

Get the finest stories, perspectives, and trends delivered straight to your inbox.

UP NEXT 98% relevance match
DVR Login
Before you go: How to reset H.264 Network DVR