New Firmware for Milestone Device
Updating firmware The user may initiate a firmware update on a supported ONVIF device via the Management Client. A right …
dvr
How to Make The Cameras Record Audio?
Purpose: There is no speaker nor a microphone in the DVR recorder. In order to record the sound on the system, …
How to Set Up Email Notification? Hikvision Hilook Annke
Purpose: You could set up the email alert function to receive the motion notification. Steps: 1. Please use Gmail, not yahoo nor …
Night Owl Password Reset Instructions
Night Owl Password Reset Don’t remember the password for your Night Owl Protect device? Follow the simple instructions below to …
Ultimate CCTV Surveillance Microphone Guide
Complete CCTV Microphone Tutorial Hooking up microphones to your DVR or IP camera gives you an additional level of surveillance. …
Boot Failure or Rebooting DVR
Your DVR may have boot failure issue if any of the following happens: LEDs are OFF at the top or …
Video Loss Troubleshooting Guide DVR NVR
Video Loss Troubleshooting for DVRs NVRs This is a basic setup guide that you need to double check if in …
What to Do If P2P Status Shows Offline?
What to Do If P2P Status Shows Offline? Purpose: If you want to remotely access the Annke system via phone app …
DVR/Change to HDCVI Analog and IP
Follow these step-by-step instructions to change a HDCVI, analog, or IP channel on an HDCVI recorder (HCVR or XVR). Prerequisites …
Avycon P2P Nat Cloud Setup Guide
For our new T900A DVRs/ H.265 NVRs, follow the instructions below to enable the NAT/P2P mode for easy remote viewing …
Avycon New NVR Playback – Backup Guide
For our new T900A DVRs/ H.265 NVRs, below are some basic instructions on how to download a video clip to …