| EVOHD is an enhanced version of the EVO192, it is the core of the Insight system, with support of the HD77 / HD77W. It provides faster and more reliable dialer over VOIP lines at 1,200 baud and large power supply of 3.5A with fast adaptive battery charging. By using a 75VA transformer, up to 2A of power can be used at the auxiliary output and a 7AH battery will be charged in few hours.
The control panel’s redundant communication methods generate reports to the Central Monitoring System (CMS) over IP, GSM, GPRS, landline or any combination. |
|||||||||||||||||||
| EVOHD Key Features | |||||||||||||||||||
| Faster – dialer over VOIP lines at 1200 baud Efficient battery charging – up to 1.5A Power supply |
|||||||||||||||||||
|
|
2.5A switching | ||||||||||||||||||
|
|
2A power available for modules/devices (requires a 75VA transformer) | ||||||||||||||||||
| Digital bus | |||||||||||||||||||
|
|
Provides continuous power, management and two-way communication between control panel and modules | ||||||||||||||||||
|
|
Efficient and effective use of zone deployment | ||||||||||||||||||
|
|
Integrated tamper reporting of EVOHD connected devices without additional wiring | ||||||||||||||||||
| PGM configuration | |||||||||||||||||||
|
|
4 on-board, solid-state PGMs (2-4) | ||||||||||||||||||
|
|
1 on-board 5A relay PGM | ||||||||||||||||||
|
|
PGM1 may be used as a 2-wire smoke input | ||||||||||||||||||
|
EVOHD Key Features |
|||||||||||||||||||
|
|||||||||||||||||||
[wp-embedder-pack width=”100%” height=”800px” download=”all” download-text=”” attachment_id=”637″ /]
I wonder if I can give you my e-mail address.
These are amazing. Thank you so much for sharing 🙂
great site man thank you
I did all but it does not
please help me, my problem is not solved.
every post is very informative for your health ..