Avycon P2P Nat Cloud Setup Guide
For our new T900A DVRs/ H.265 NVRs, follow the instructions below to enable the NAT/P2P mode for easy remote viewing of your AVYCON System:…
Avycon New NVR Playback – Backup Guide
For our new T900A DVRs/ H.265 NVRs, below are some basic instructions on how to download a video clip to a USB Flash drive…
Avycon NVR Port Forwarding – DDNS Setup Guide
For our new T900A DVRs/ H.265 NVRs, below are some basic instructions on how to configure the DVR for your network and enable our free…
Hikvision Hilook Reset Password NVR/DVR/IPCAM NEW
How to Reset Hikvision Device Password via Hik-Proconnect How to Reset Password of NVR DVR via Hik-Connect App How to reset the password in…
How to Set Up APP Push Notification for Motion Detection?
Here are the steps about how to set up the push function for the security system. 1. Log into the Annke DVR/NVR system, then…
How to Set Up 24 Hours Recording?
NOTE: The DVR needs an internal hard disk drive for recording. Without the hard drive, the system can show live viewing, but can’t record, playback…
How to Set Motion Detect Recording on Your DVR?
To set motion detection recording, you need firstly ensure there is an internal hard disk drive in your DVR. Otherwise, the DVR is unable…
How to Connect DVR/NVR to Phone App?
Please search Xmeye in google play or apple store and install it into your phone. Here are steps to use the App Xmeye to…
How to Connect DVR/NVR on Computer Software CMS?
CMS can help you to manage your DVR/NVR both locally and remotely. But before adding your DVR/NVR to CMS, please go to the Main menu–Info–Version to…
How to Play Back Videos?
1. You can playback video on the monitor. 2. You can playback on the phone. Here is the method of how to connect the…
Vguard DVR/NVR And Camera Passwords New
You can find the factory password of Vguard branded dvr, nvr recording devices and ip camera systems, installation and use of cms software in…
Mobile computer remote remote equipment
How to remote mobile phone and computer: – Confirm the version information recorder interface nat state of the connection is successful, if the state is to detect,…
