Tutorial of PoE IP System
Preparation 1. PoE NVR, IP camera 2. Memory card, waterproof tape, HDD, HDMI cable, Network cables, Monitor. a) What can …
Installation Guide
How to Dynamic DNS ACTi Cameras
How to Use Dynamic DNS with ACTi Cameras There are surveillance solutions that consist of single cameras scattered over a …
What to Do If P2P Status Shows Offline?
What to Do If P2P Status Shows Offline? Purpose: If you want to remotely access the Annke system via phone app …
How to Initialize Video Intercom using Configtool
How to Initialize Video Intercom using Configtool Description Initializing our Video intercom with Configtool simplifies and streamlines the process. Configtool …
XMEYE – How to connect an IP camera to the DVR
Video transcription: How to connect an IP camera to the DVR? Notes: 1.The IP camera needs to support onvif protocol. …
How to Connect the DVR/NVR System to the Phone APP via QR Code?
Adding the ANNKE system to the phone APP Annke Vision via QR code will allow us to watch cameras on the phone remotely ( …
Add a Dahua Device New GUI
Description This article will show you three different methods to add a dahua device to our New GUI recorders. We …
How to Setup Intercom with a PBX Server?
After creating an extension from a PBX server, you can register the intercom with the extension number(User ID, Authentication ID), …
How Do I Weather Seal a Camera?
Summary: The following article explains the steps required to correctly weather seal cameras that are exposed to moisture, as explained …
How to Use CMS Multi-Monitor
1.1 CMS Multi-Monitor Introduction The Milesight CMS provides a powerful monitor surveillance tool that enhances security by providing administrators flexibility …
Milesight How to Enable the Motion Detection on NVR
To help you to get the points you want, please read the lead-in first. Lead-in This document is organized by …