How to Add DeskCamera to a NVR

0 24


DeskCamera is an affordable and easy solution for streaming multiple desktops screens and web cameras from a single computer to your compliant network recorder.




1. Start up DeskCamera and get your NVR/HCVR/DVR accessible.


2. Notice the DeskCamera settings, the IP address of the computer, username and password, and the port your desired display is on. The stock settings on DeskCamera allow you to add the Desktop you want easily (mainly the username admin and admin, Dahua’s defaults). Now select Setting->Camera->Remote Devices and search for the settings noted before. Once you have found the device, check the box and select Add.


3. Notice the status of the added device, make sure it is green, then select preview.


4. Select the desired feed to view your desktop. If you are having difficulty adding the device use the steps below to manually add the desktop.


5. In this scenario I would like my Desktop to be private on the network so I will setup a new username and by selecting stop and entering in my credentials. After this select start to start up the camera.


6. On the NVR/HCVR/DVR Go to Setting->Camera->Remote Devices and select Manual Add and then enter in the highlighted information which can be found in DeskCamera.


Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

DMCA.com Protection Status