---

Annke DVR/NVR Recording Guide

0 242

How to Set Up Motion Detection Recording?

Purpose: Motion detection recording means will record automatically when it is triggered by movement.

 

NOTE: The needs an internal hard disk drive for recording. Without the hard drive, the system can show live viewing, but can't record, playback either.

Here are the steps for you:

1. Go to Record –>Record Plan choose the channel, set the weekday, set the time schedule, and check the “Motion“. Then click “Apply” to save the config.

JA_motion_detection_recording.jpg

2. Go to the Channel Setup–>Video Detection to enable Motion Detection. Please adjust higher the Sensitivity at the beginning and set the detect area. Remember to click “Apply” to save the config.

JA_motion_detection_setting.jpg

JA_motion_detection_recording_area_setting.jpg

How to Playback ?

NOTE: You can playback the recording on the monitor, on the computer browser, and on the phone app.

Playback on the monitor.

Right-click mouse on the NVR monitor and select –>manual search select the channel, type of video and click search and drag the time bar to where it has color and click playback.

JA_Menu.jpg

Playback on the phone APP

Here is the method to get the phone view.

https://help.annke.com/hc/en-us/articles/360000254222

Go to playback and select channel, period.

Annke_Sight_Playback.jpgAnnke_Sight_Platback_Settings.jpgAnnke_Sight_Playback_Date.jpgAnnke_Sight_Playback_Channel.jpg

Playback on the computer

Here is a method to get a view on a computer.

https://help.annke.com/hc/en-us/articles/360000254261

Go to playback and select channel, period, and type of video. Click search.

JA_PC_Playback.jpgJA_PC_Playback_2.jpg

Set up Motion Detection on Annke DVR/NVR

Purpose:

Enabling motion detection can trigger certain channels to start recording, or trigger full-screen monitoring, audio warning, notifying the surveillance center, sending an email and so on.
You can enable the function and set it up.

 

Before you start: 

  • You should log in to your DVR/NVR.
  • Click Menu>>Motion

 

Enter the Motion interface and Configure Motion Detection.

  • Camera: Choose a camera you want to configure.
  • Enable Motion Detection: Tick the checkbox to enable motion detection.
  • False Filter: Tick it to enable RIP function.
  • Sensitivity: Slide the progress bar to the right to adjust the sensitivity of motion detection.
  • Full Screen: Set the motion detection for all the area shots.
    Note: You can drag and draw the area for motion detection by mouse.
  • Clear: Clear the motion detection area.Motion_detection_-_Enable.png
  •  Settings: Select the trigger channels, Set the arming schedule, and linkage action according to your needs.
    •   Trigger channels: select the channel you want to set up.
    •   Arming schedule: set up the arming schedule.
    •   Linkage action: enable or unable the linkage action.
      Motion_Detection_-_Trigger_Channel.png
  • Apply: Click Apply to save the setting.
  • OK: Click OK to exit this page.
  • Copy:  Click it to copy to other channels you want.
Note: Please refer to Set up Recording Schedule on Annke DVR/NVR to configure recording schedule, while you may choose Motion as the record type.

Set up Recording Schedule on Annke DVR/NVR

Purpose:

Set the scheduled recording, and then the camera will automatically start/stop recording according to the of the schedule.

 

Before you start:

  • You should log in to your DVR/NVR.
  • Click MenuRecord>Schedule

 

The interface of Record:

Recording_Schedule_-_Schedule.png

Camera: choose the camera you want to configure.

Enable Schedule: Must Tick the checkbox and enable the recording schedule.

Edit: Edit the schedule, the detailed description shows below.

Different recording types are marked in different color icons.
Continous: scheduled recording.
Event: recording triggered by all event-triggered alarm.
Motion: recording triggered by motion detection.
Alarm: recording triggered by alarm.
M/A: recording triggered by either motion detection or alarm.
M&A: recording triggered by motion detection and alarm.

Notes:
  • The Alarm, Motion & Alarm, and Motion | Alarm recording types don't support all series DVR/NVR.
  • You can also use the mouse to click on the color icon to select a record type, click and drag the mouse on the schedule process bar to set up the recording schedule.

 

Edit the schedule: click the Edit button.

  • Weekday: Choose the day to which you want to set a schedule. (Monday to Sunday)
    Note:
    The Holiday option is available as the Weekday Type when you enable holiday schedule in Holiday settings.
    It is as the highest priority: The system will give priority to carry out the holiday setting plan, the other Monday to Sunday setting plans will be invalid. (How to enable holiday recording?)
    Holiday.jpg
  • To schedule an all-day recording, check the All Day item checkbox.Recording_Schedule_-_Edit_All_day.png
  • To arrange another schedule, leave the All Day checkbox blank and set the Start/End time.
    Start_time_and_end_time.png
    Notes:
    Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other.
    Repeat the above steps to schedule a recording for other days in the week. If the schedule can also be set to other days, click Copy.
  • Select the record type in the drop-down list (Continuous, Motion).
    Recording_Schedule_-_Record_type.png
  • Click Apply to save the settings and then click OK to back to the upper-level menu.
     

 

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

DMCA.com Protection Status