Our Support Hours:(NJ)(CA)    Monday to Friday, 8:30 AM – 9:00 PM (EST)
You may e- LTS Technical Support at (based on your region)

East          Support.NewJersey@LTSecurityinc.com

Central     Support.Houston@ltsecurityinc.com

West         Support.LosAngeles@LTSecurityinc.com

This KB applies to the Platinum DVR/NVR/IPC series.
mceclip0.png

Requirements

1. 10 Laptop / PC.

2. Local environment.  The recorder or is on the same as your computer.

3. You have administrative rights on your personal computer.

4. You are authorized to access the recorder

One Picture Flowing Diagram:mceclip1.png

 

Resetting the Password

Step 1. Open the IP Portal first.   Select the device that needs to have its password reset.
Step 2. Select “Forgot Password.” on the bottom right corner.

mceclip6.png

Step 3. A new menu will now present itself. This is the password reset menu.
Click Export.   Remember: Export/Import Key must finish within a day. 

mceclip5.png

 

Step 4. Select Export and then designate the location the file will be saved to.

mceclip8.png

 

Email to:  

East          Support.NewJersey@LTSecurityinc.com

Central     Support.Houston@ltsecurityinc.com

West         Support.LosAngeles@LTSecurityinc.com

 

 

 

Step 5. Once you have the file. E- the XML file to LTS.

 

Step 6. LTS Tech Support will reply email with the unlock file.
You will need to download the attached file onto your personal computer.

 REMEMBER:  Export/Import unlock file must process in a day.

Step 7. Select “Import File” under Step 2. Select the browse icon next to find the file you received from LTS Tech Support.

mceclip9.png
Note: “admin” keyword in the password is forbidden.

 

Step 8. Create a new password for your device. Once complete, select “Confirm” to change it. You have successfully reset the password.

 

To learn more about all of the functions in the Platinum IP Portal, refer to the IP Portal reference sheets for more information.

 

 

More Reference:  IP Portal

If you haven’t installed the Platinum IP Portal program, click here to learn more.
If you are instead having issues with resetting your password, learn more here.
Before proceeding with the rest of this guide, please ensure that you have met the requirements below.

How can I get the Secure Code for Platinum NVR/DVR?

What are Secured Codes?
A secured code is required when resetting the password on LTS Platinum Recorders (UI3.0). The secure code will changes based on the System Date.  You need to open the Password Reset window from the Local Console to enter it.

 

How to get the Secure Code?

To receive a secured code, you may do one of the following;

1. E-mail Support.NewJersey@LTSecurityinc.com and request a secured code.

2. Call our support center at 1-831-250-1292.

3. Contact your LTS sales representative.

How to local the Reset Password window?
To learn more on how to use the secured codes, click here.


What Are Old, New, and WH Codes?

 

The secured code is not a combination of all three codes. You will only use one of the three for your recorder depending on the model and type.


What happen if I don’t have the local monitor?
A secured code is not required if you are resetting the password through our program, the Platinum IP Portal. If you would like to learn more about using the IP Portal program, click here.

UI 3.0 – Reset Login Password

Locate the Password reset window first.

If you forgot the password and you want to reset it, the fast easy way is using the local DVR/NVR access.
Please make sure you are looking at the correct interface (UI 3.0).
How to identify the UI 3.0, 4.0 click Here.

1. Your Main Menu button is located from the bottom right of the screen.  Click it.  If you see something like the picture looks like (ie: Export, Manual HDD, etc..)   Please Log Out first.


Go MENU > Shutdown > LogOut

2. Once you Logout the menu, click the MENU again.  You should see the Login Screen.
The Login Pattern window (below picture Left) or the Login Window. (Pic Right)

3. If the Login Pattern window is pop up, please don’t log in.  Instead, click the Switch User at the bottom.  If you already see the Login Window, please go to step 4.

mceclip0.png

 

4. (Important)  When you see the Login window,  move the mouse cursor to the bottom left corner.  Double click (Left Click) on the edge corner.  It should pop the Restore default password window.  If the window is not pop up, cancel the window and repeat the step 3-4 until the restore window shows.

mceclip0.png
This is the “Restore default password” window looks like. 

mceclip1.png


How to get the Secure Code?

You can contact/email the LTS Call Center.

 

Once you get the code, Take note of the system date.

You must use the secured code that corresponds with that system date.

For example, the format of the date; the translation is:   Year  Month  Day   2018 09 26

mceclip2.png

Type the secured code that corresponds with the system date on your recorder as indicated in the picture below. Note: Try New code first, if doesn’t work, try others.

mceclip4.png

mceclip3.png

 

Then, it should popup either Create New Password or restore to the default password (12345) for before the year 2015 model.

The create New Password window

The password must contain 8 to 16 characters, combining numbers, lowercase letters, uppercase letters, and special characters.
At least two types of the above-mentioned characters are required to activate the device.
The new password can not contain “admin” keyword)

The system will check the password strength;  Minimal 1 bar at least.

mceclip0.png

UI 4.0 – Reset Login Password

The 4.0 interface MENU blue banner is locate on the top of the screen.

mceclip0.png

Click the icon to Power Off > Log Out, then Log On again.

mceclip0.png

(If you have the Draw Pattern window popup, go to the pattern bottom.
Select Switch To the User Window.)

Click Forgot Password.

 

mceclip1.png

Choose Verify by Secret Question to Answer that you defined it before.

mceclip1.png

Or, select GUID (aka USB key file) / Verify by Reserved Email (if available).
If you forgot or haven’t any there, then you must use PC (IP portal) to reset the password.

 

 

Summary
To ensure the highest level of protection, LTS has launched a new login procedure
that requires users to create a new password for the admin account upon the first login to
all devices. The password must contain 8 to 16 characters, combining numbers,
lowercase letters, uppercase letters, and special characters.
At least two types of the above-mentioned characters are required to activate the device.

The system will check the password strength; “Risky” passwords will not be accepted.

mceclip0.png

For the latest DVR/NVR/IPC firmware.
The password can not contains the User Name inside.

(Unbind PTCloud) – How to Unbind the PTCloud number?

Hello, there is a hold on all PT Cloud Unbinding Requests.

 

1 – If your DVR/NVR is running 4.0+ Firmware, and you have a mouse and a monitor connected directly to the DVR/NVR, go to the DVR/NVR, and go to the PT Cloud Settings (On some Units it is called Platform Access instead of PT Cloud) if there is an “Unbind” Button, click that button, and it should be able to unbind the device from the account.

mceclip0.png

 

if there is no “Unbind” Button, then try this other way

 

2 – Using a Mobile Phone or Tablet, first connect the Mobile Phone or Tablet to the same local network as the DVR/NVR, then using the LTS Connect Mobile APP, Scan the QR Code like you would normally to add a device, the APP will of course tell you that the device is already bound to an account, but there will be an “Unbind Device” Button on the APP towards the bottom of the page. Select that button, and give the APP some time to process the command.

Note – Not all DVR/NVR with 4.0+ firmware will have the “Unbind” Buttons on the Local Monitor PT Cloud / Platform Access Settings

 

Note – When using the “Unbind Device” Button in the LTS Connect Mobile APP, the Mobile Phone / Tablet MUST be on the same local network as the DVR/NVR

 

Note – DVR/NVR with 3.0- firmware will NOT have the “Unbind” Buttons on the Local Monitor PT Cloud / Platform Access Settings.